Support Q & A Home

Ask A Question

Anyone can ask or answer a question here, but our support engineers actively monitor your questions; we typically answer within a day or two.

Filter
Viewing Page 10 of 105 (20 questions out of 2087)
1
replies

I am getting an intermittent Unhandled Exception error for Ensure Application Pool when it gets to it's step of Applying Configuration. This is using all of the same property values, same server, same time of day it's run nightly but it will fail with this error intermittently. It will also occur intermittently when run it manually.

This app pool does previously exist in the environment this error occurs in. At this time I cannot move to a new environment to see if it occurs there.

I've been unable to find any other reason for this error, the server is not down - several steps prior to this one succeed on the same server, no event log errors on the server of any kind.

Here is the error info:

Applying configuration...
    Unhandled exception: System.Runtime.InteropServices.COMException (0x800710D8): The object identifier does not represent a valid object. (Exception from HRESULT: 0x800710D8)
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Inedo.Agents.InedoAgentClientBase.<SendMessageAsync>d__28.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Inedo.Agents.InedoAgentClientBase.<ExecuteCommandAsync>d__26`1.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Inedo.BuildMaster.Extensibility.Agents.TcpAgent.<Inedo-Agents-IRemoteJobExecuter-ExecuteJobAsync>d__34.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Inedo.BuildMaster.Extensibility.Operations.RemoteExecuteOperation.<ExecuteAsync>d__5.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Inedo.BuildMaster.Windows.ServiceApplication.Executions.PlanExecuter.DeploymentPlanExecuter.<Inedo-ExecutionEngine-Executer-IExecutionHostEnvironment-ExecuteActionAsync>d__25.MoveNext()

Thanks.

Product: BuildMaster
Version: 5.6.11

1
replies

The download count for NPM packages is incorrect, see:
Image Text

(we are running v 4.7.13)

Product: ProGet
Version: 4.7.13

4
replies

I created a connector to nuget.org. The connector shows healthy and no errors.
When I open my package source in VS only my packages are shown and none of the packages from nuget.org.

All the other packages should be listed there too, right? I don't have to pull the package before to my feed via the "Add Package" button?

Product: ProGet
Version: 4.7.11

0
replies

Can you please increase the metadata output. Right now I am only able to see The Description, Release Notes and Tags. Would it be possible to show somewhere (maybe new tab) to show all the metadata Text.

Thank you
H

Product: ProGet
Version: 4.7.13

1
replies

I am attempting to load build artifacts that are create with Bamboo. In this particular case, I am taking an setup.exe file and trying to upload it into ProGet. Here's what I did:

  1. I create a simple upack.json file, which contained only the name and version of the file

  2. I entered the upack command as follows:

upack C:\location_of_upack_json_file C:\my_setup.exe --targetDirectory=C:\mytargetDir\build_artifacts

Nothing worked. Here are some of the things that happened:

  1. FileNotFound exception for the path of the setup.exe file
  2. Permission error exceptions (even when I executed up upack with admin privileges).

So my question is this. What is the exact syntax that I need to use upack to upload and download my build artifacts. The ProGet documentation is not exactly concise on this issue. Please advise.

Product: ProGet
Version: 4.7.12

1
replies

Will ProGet work on a disconnected network? I do work on a local corporate network that has no connectivity to the internet, so the installer and application would not be able to reach out to any 3rd party sites. We already have SQL Server installed, so the installer would not have to download SQL Express. Is this doable?

Thanks.

Product: ProGet
Version: 4.7.12

1
replies

Using the package manager console from VS2017, the Find-Package cmdlet works fine querying a ProGet server unless I use the -StartWith switch, which yields the error:

Find-Package : Response status code does not indicate success: 404 (OData method is not implemented.).

Given the error, is the required functionality actually implemented in ProGet?

Product: ProGet
Version: 4.7.11

4
replies

Hi,

If I try to push a package versioned as 0.1.0-unstable.3 or 0.1.0+2, I will get a Server 500 error returned from Proget. The logs show System.FormatException: Invalid version number.
Does Proget not support SemVer 2.0.0 ?

Product: ProGet
Version: 4.7.11

0
replies

Hi There,

I am trying to configure tfs source control and using that in import tfs artifact action,
then i am getting the below issue.

Unhandled exception: System.Security.Cryptography.CryptographicException: Padding is invalid and cannot be removed. at System.Security.Cryptography.RijndaelManagedTransform.DecryptData(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount, Byte[]& outputBuffer, Int32 outputOffset, PaddingMode paddingMode, Boolean fLast)

Thanks,
Srinivas

Product: BuildMaster
Version: 5.6.5

1
replies

Go language installs packages directly from the website see: https://golang.org/cmd/go/#hdr-Download_and_install_packages_and_dependencies

Is there any ability in ProGet to cache those packages in order to make it work offline ?

Product: ProGet
Version: 4.7.12

0
replies

Not sure if this is actually supposed to be live yet as I could not find any documentation on it but I was trying to use Ensure Application and while it did work there doesn't seem to be a way to tie it to a specific App Pool.
Just wanted to check if there was some way of doing so or not.

Product: BuildMaster
Version: 5.6.11

1
replies

Hi,

I'm looking for more information about the web debug level configuration value: http://inedo.com/support/sdk-reference/proget/Inedo.ProGet/ProGetConfig.Web/DebugLevel

Is 0 the highest? Is 0 the lowest? If so, what's the highest?

Thanks,
Adam

Product: ProGet
Version: 4.6.5

6
replies

Hi There,

I am trying to host a website using new otter script in buildmaster 5.6.5. But i am getting the below issue.
Unhandled exception: System.AggregateException: One or more errors occurred. ---> System.ArgumentException: The specified HTTPS binding is invalid. at Microsoft.Web.Administration.BindingCollection.Add(Binding binding) at Microsoft.Web.Administration.SiteCollection.Add(String name, String bindingProtocol, String bindingInformation, String physicalPath, Byte[] certificateHash)

Script i am using to execute is:
IIS::Ensure-Site ( Name: somesitename, AppPool: somesitenameAppPool, Path: C:\inetpub\wwwroot\somesitename, Protocol: http, Binding: localhost, Exists: true );

Quick response apprecited.

Thanks,
Srinivas.

Product: BuildMaster
Version: 5.6.5

1
replies

Hello,

I want to install Proget but the user which will be used to connect with the database doesn't have enough permissions to create database so I am looking for database script which I can give to dba-s so that they can pre-create it. I downloaded manual installer which contains bmdbupdate.exe but we don't want to run third party exe file on our database server. I also exported the scripts to zip file but running all those scripts manually is impossible.

Can I get a single script for setting up the database ?

Product: ProGet
Version: 4.7.12

2
replies

Hi,

I have ProGet configured to use LDAP and the Integrated Authentication is enabled.
If I open the web page in Chrome/IE the "Authentication Required" Pop-Up is still shown and I have to enter my credentials.
What do I have to change to get logged in automatically?

Product: ProGet
Version: 4.7.12

2
replies

Before I go and script this out using the API I wanted to check if there was a way to already do this.
I need to use deployables from two different applications so I have imported them into this new app.
What I am wondering about is that one of the imported ones has Config files that need to be deployed as well, can I just call Deploy Config from this new app and get that deployables configs or do I need to script that out using the API?

Product: BuildMaster
Version: 5.6.11

1
replies

I'm getting the following while installing ProGet

Service cannot be started. System.InvalidOperationException: Operation is not valid due to the current state of the object.
at Inedo.ProGet.Service.ServiceTaskManager.Start(Func`1 precondition, Int32 retryCount, Int32 retryDelay)
at Inedo.WindowsServices.InedoService.Start()
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)

Product: BuildMaster
Version: 5.7.0

2
replies

Is there an ETA for ProGet 4.7.12 on Linux? PG-1027 (FIX: (Linux only) Requests are silently discarded when the path contains a colon or an asterisk) is a showstopper for hosting Docker registries, since docker tags necessarily have a colon in them (e.g. inedo/proget:latest).

I attempted modifying the ProGet 4.7.11 Dockerfile to pull 4.7.12 instead, and with another modification to make sure xz-utils was installed, was able to get it running, but the web login route seemed to be broken.

Thank you,

Paul Trampert

Product: ProGet
Version: 4.7.12

1
replies

Hi,

My organization is investigating the effort in switching to using BitBucket instead of TFS, and I was wondering if BuildMaster has support for doing things like continuous integration on a pull request (no deployment, just build and integrate). I know there are SCM triggers, which will work for something like a push - as long as we are willing to create a trigger for every branch we'd like to build (we have this for TFS, but it is annoying to manage). Side note - it woulde be great if the triggers had some sort of branch support!

I know we can call the api to create a package, and subsequently deploy it to an environment, but that isn't something that can easily be accomplished on the BitBucket side. There is a free plugin to call an api endpoint... but it isn't easy to chain the calls to create a package (and also needing to know the current release number), then deploy. It would be a lot easier if there were one method that could kick off a build, and use HTTP status codes to relay the result of the build/integration.

Product: BuildMaster
Version: 5.6.6

2
replies

Done everything according to KB article. "docker ps" looks like this

c3d9b5c13aab        inedo/proget:latest   "/bin/sh -c 'sed -..."   43 hours ago        Up 9 minutes        0.0.0.0:8081->80/tcp   proget
ac85e82d719f        postgres:9.5          "docker-entrypoint..."   44 hours ago        Up 9 minutes        5432/tcp               proget-postgres

Launching "curl 127.0.0.1:8081" on the same machines gives me this

curl: (52) Empty reply from server

And now "docker ps" looks like this

c3d9b5c13aab        inedo/proget:latest   "/bin/sh -c 'sed -..."   43 hours ago        Up 16 seconds       0.0.0.0:8081->80/tcp   proget
ac85e82d719f        postgres:9.5          "docker-entrypoint..."   44 hours ago        Up 17 minutes       5432/tcp               proget-postgres

"docker logs proget" doesn't give anything except

Determining which change scripts need to be run...
Database is already up to date.

Executing additional scripts...

Tested on
Ubuntu 14.04 LTS (GNU/Linux 3.13.0-24-generic x86_64)
Docker 17.03.1-ce

Product: ProGet
Version: 4.7.11

Ask A Question
Page: 1 2 3 4 5 6 7 8 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105