Support Q & A Home

Ask A Question

Anyone can ask or answer a question here, but our support engineers actively monitor your questions; we typically answer within a day or two.

Filter
Viewing Page 19 of 101 (20 questions out of 2014)
2
replies

Is there a way to tell if a Stage is being auto deployed by a previous stage or manually executed?
I'm trying to handle a situation where the script will act a bit differently based on if it is auto deployed or not.

Product: BuildMaster
Version: 5.6.6

1
replies

We recently updated from ProGet v4.0.9 to v4.6.6. We did have some trouble with several failed attempts due to inadequate DB access which we've now resolved.

Now though, when we go to the page of a particular feed, not all of the packages are displaying their descriptions. Some are, some aren't. If you click on a package link, then the description is there on the details page.

Please look into this and let us know what's up. We'd like to have these descriptions displayed on the feeds page.

Thanks,
Scott Araujo
WebMD

Product: ProGet
Version: 4.6.6

1
replies

Currently proget doesn't support authToken authentication. This means we can't publish to proget via TravisCI. This is kind of a show stopper for us. Is authToken support on the roadmap?

Product: ProGet
Version: 4.6.7

1
replies

Hello
I have found a small problem in a recurring job.

  • current time : 31/01/2017 16:00
  • Create a Recurring Job (every at 16:30)
  • The job is immediatley executed (31/01/2017 16:01) and scheduled for the next day (01/02/2017) at 16:30

Expected behavior :
The job should run at 31/01/2017 16:30 and the scheduled the next day (01/02/2017) at 16:30

Hope it is understandable :-)

Regards
Philippe

PS: You definitively need to speak french ;-)
Philippe

1
replies

Hello,

We are trying to setup our ProGet instance with Active Directory as a Domain Forest Directory because we have two domains that will need access to the packages. I was able to set it with one of the domains but it doesn't seem to be finding any user account in the other domains. I also cannot find anything on the UI that allows me to setup ProGet to look at a specific Organizational Unit, so it is currently scanning the whole domain for users and groups.

I've tried looking at this page but all it says on the page is what each feature offers, not how it is setup, so that isn't very useful.

https://inedo.com/support/documentation/proget/administration/ldap-active-directory

Any assistance would be helpful!

-Raul

Product: ProGet
Version: 4.5.4

2
replies

What is the rest api endpoint i can reach out to in order to use a script on demand instead of the scheduled task to check for proget updates?

Product: ProGet
Version: 4.6.7

1
replies

Good Afternoon,
Can someone please tell me how to change the context root for my Proget 4.6.6 install? In my company I have a proxy server that routes all traffic to the various web servers and they are all routed via URI. For example:

https://mycompany.com/bitbucket
https://mycompany.com/jira

I need to be able to access my Proget server via https://mycompany.com/proget. Can someone tell me how to configure this please?

Regards

Robert Compton

Product: ProGet
Version: 4.6.6

2
replies

I entered length of 171 characters in the override reason, it has no response clicking override. But once removed the reason, the override worked. Is 171 characters too long for the reason portion? Is there a maximum length for it?

Product: BuildMaster
Version: 5.6.4

1
replies

Hi,

How can I delete a bunch of packages in bulk from server. we are accumlating a lot of version, and we only need to keep the last few.

Product: ProGet
Version: 4.6.4

0
replies

I added a new maven feed + connector (to https://repo1.maven.org/maven2 )

Then I manually executed the Scheduled Tasks

  1. FullMavenConnectorIndex
  2. BuildMavenFeedIndex
  3. FeedCleanup

All of them were successful, but the connector still shows up as "Unknown" state with 0 packages.

When I manually pull a package from the connector, it is correctly chached however.

What am I doing wrong? Why is the connector not showing as healthy and listing all packages it has?

Product: ProGet
Version: 4.6.6

1
replies

After the SQL scripts ran in an environment, they used to show if they failed or succeeded. I do not see that feature currently. Am I overlooking it?

Product: BuildMaster
Version: 5.6.5

7
replies

When editing "Deploy artifact" I'm attempting to browse the directory. When I select any linux server I get the error:
"ERROR: The type initializer for 'Inedo.Ssh.NativeMethods' threw an exception."

The error is the same as described in this question:
http://inedo.com/support/questions/5017

I was using version 5.6.3 when I first saw this error. I've updated to 5.6.5 with the same result. I also tried to replace the lib files as suggested in the above question and had no luck

Product: BuildMaster
Version: 5.6.5

9
replies

Hi

I have setup a feed where "Strip symbol files from packages downloaded from this feed" option are enabled.

Published a .net *.symbols.nupkg package to this feed, and on installing package from visual studio getting the .pdb files inside /lib folder even though "Strip symbol files from packages downloaded from this feed" option is checked on the feed configuration page.

Is this a bug? Or I'm missing something here?

Product: ProGet Version: 4.6.3

Product: ProGet
Version: 4.6.3

Product: ProGet
Version: 4.6.3

6
replies

Hello. I try to upgrade proget from 3.8.6 to 4.6.6 version. I download installer but nothing happens after installer launch (it extract and close)

Product: ProGet
Version: 4.6.6

5
replies

By default, operations will be performed as the user that the agent service runs as (Local System). I am trying to perform some group and user operations using PSDsc. Because this DSC operation must reach out to the domain, it will not have domain rights to query the members being added to the group.

PSDsc Group
(
    Otter_ConfigurationKey: CreateDummyGroup,
    GroupName: DummyGroupCreatedByOtter,
    Ensure: Present,
    Description: Test using PSDsc from Otter,
    Members: "`@('mydomain\myuser')"
);

This will produce the error:

PowerShell DSC resource MSFT_GroupResource failed to execute Set-TargetResource functionality with error message: Credentials are required to resolve the domain account mydomain\myuser.

Perhaps allowing General blocks to execute with specific credentials (impersonate) might be a solution? I have done this type of impersonation in PowerShell, and found that a different type of impersonation is required to perform network operations.

I think offering impersonation may offer a better solution than running agents as a domain user, as it is by default low privileged, and only impersonate when absolutely needed.

2
replies

Kind of an odd error, but powershell scripts that I have uploaded to Otter as assets are sometimes saving with duplication of the last couple lines. It seems like it may be centered around the "Stop-Transcript" command.

Image Text

Note the last few lines. It has pulled a portion of line 28 and appended it to line 30 on its own and added 30 to line 32 with an extra "t" on the end.

This script luckily isn't changed because this portion was commented out, but starting at line 30, it used to only read "#Stop-Transcript". I have added various other similar scripts and have seen up to 3 additional lines tacked on to the end. Sometimes entire lines, sometimes just extra characters, like the extra "t" on the last line.

The additional problem is that when trying to fix this if I delete all of the extra junk and save, then no changes are saved. The only fix appears to be completely deleting the asset and creating it again.

Has anyone seen this before or know of a solution? Thanks!

1
replies

Hi guy
we have many dead files in the ProGet WebUI they can't download.

You have any idea's how we can cleanup the metadata from files they don't exist on the disk?

Product: ProGet
Version: 4.6.5

2
replies

I am trying to use the Ensure or Get Proget Package, feed is correct, credentials correct, but when it runs i'm getting an odd error:
The server returned an error (404): OData method is not implemented.

This is for a Nuget feed so is that supposed to work via these functions?

Product: BuildMaster
Version: 5.6.4

2
replies

Is there a way for me to use BuildMasters resource credentials when calling a Powershell script stored in BuildMaster?

Thanks.

Product: BuildMaster
Version: 5.6.4

1
replies

Hi,
I have Proget 4.6.5 installed with the standard settings , existing SQL Server Instance and Network Service for the account ProGet will run as.
When calling http://localhost:81 I get an logon error for user 'DOMAIN\MACHINENAME$' (SqlException (0x80131904)


Serverfehler in der Anwendung /.

Fehler bei der Anmeldung für den Benutzer "DOMAIN\MACHINENAME$".
Beschreibung: Unbehandelte Ausnahme beim Ausführen der aktuellen Webanforderung. Überprüfen Sie die Stapelüberwachung, um weitere Informationen über diesen Fehler anzuzeigen und festzustellen, wo der Fehler im Code verursacht wurde.

Ausnahmedetails: System.Data.SqlClient.SqlException: Fehler bei der Anmeldung für den Benutzer "DOMAIN\MACHINENAME$".

Quellfehler:

Beim Ausführen der aktuellen Webanforderung wurde einen unbehandelte Ausnahme generiert. Informationen über den Ursprung und die Position der Ausnahme können mit der Ausnahmestapelüberwachung angezeigt werden.

Stapelüberwachung:

[SqlException (0x80131904): Fehler bei der Anmeldung für den Benutzer "DOMAIN\MACHINENAME$".]
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +356
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +117 System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +267
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource1 retry, DbConnectionOptions userOptions) +318 System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource1 retry) +132
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource1 retry) +246 System.Data.SqlClient.SqlConnection.Open() +122 Inedo.Data.SqlServerDatabaseContext.CreateConnection() +356 Inedo.Data.DatabaseContext.ExecuteInternal(String storedProcName, GenericDbParameter[] parameters) +204 Inedo.Data.<Read>d__21.MoveNext() +114
System.Collections.Generic.List1..ctor(IEnumerable1 collection) +452
System.Linq.Enumerable.ToList(IEnumerable1 source) +70 Inedo.ProGet.InternalConfig.ReadConfigValues() +13 Inedo.ProGet.LazyCached1.GetValue() +98
Inedo.ProGet.ProGetConfig`1.ReadBoolean(String key) +59
Inedo.ProGet.Proxy.get_Enabled() +39
Inedo.ProGet.WebApplication.<BeginFirstRequestAsync>d__3.MoveNext() +1267
System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) +14139120
System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) +62
Inedo.Web.<HandleBeginFirstRequestInternal>d__27.MoveNext() +455
System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() +31
Inedo.Web.InedoHttpModule.ProcessEnd(IAsyncResult ar) +118
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +116

Versionsinformationen: Microsoft .NET Framework-Version:4.0.30319; ASP.NET-Version:4.6.1586.0

How can a solve this issue?

Product: ProGet
Version: 4.6.5

Ask A Question
Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101